¶ 1.Tools:
- S2.0 Allen key
- S2.5 Allen key
¶ 2.Check the NTC cable of ACE Pro:
¶ Step 1: Turn off the printer
Please turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Turn off the ACE Pro
Please unplug the ACE Pro signal cable and power cord, then remove the teflon tube.
¶ Step 3: Remove the ACE Pro inner shell
1. Remove the four screws fastening the ACE Pro signal input board and power cover using the S2.0 Allen key.
2.Tear off the footpad and use the S2.5 Allen key to unscrew the six screws holding the ACE Pro's inner shell.
¶ Step 4: Detach the ACE Pro inner shell
Use an S2.5 Allen key to unscrew the two screws holding the ACE Pro panel, then detach the ACE Pro inner shell.
¶ Step 5: Check the ACE Pro NTC cable
Please invert the ACE Pro inner shell, then check whether the NTC cable on the motherboard is loose.
