¶ 1.Tools:
S2.5 hex key
¶ 2.Replacement Steps:
¶ Step 1: Turn off the Printer
Before proceeding with the replacement, ensure that the printer is turned off and disconnect the power to ensure safe operations.
¶ Step 2: Remove the Control Screen Ribbon Cable
Disconnect the FPC ribbon cable from the control screen.
¶ Step 3: Remove the Bottom Plate
Use the S2.5 hex key to remove the fixed screws from the bottom plate.
Disconnect the fan's wiring connector and remove the bottom plate.
¶ Step 4: Replace the Control Screen FPC Ribbon Cable
Lift the ribbon cable latch and detach the FPC ribbon cable connected to the mainboard.
Replace the FPC ribbon cable and reconnect it to the mainboard interface. (Note the correct orientation of the ribbon cable insertion.)
¶ Step 5: Install the Printer Bottom Plate
Connect the fan's wiring connector back to the mainboard port.
Use the S2.5 hex key to reinstall and secure the bottom plate.
¶ Step 6: Reconnect the Control Screen Ribbon Cable
Reconnect the FPC ribbon cable from the control screen.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page