Generally, it takes 15 minutes to assemble. It may vary according to the customer's DIY ability (please refer to the unpacking and installation video for the specific assembly process).
Clip the rack onto the side profiles.
The Kobra 2 Neo machine needs to be warmed up and probed, and the whole process takes 10 minutes.
The material break detection switch interface is optional. If material break detection is not required, just leave it unconnected.
Kobra 2 Neo print size: length/width/height: 220 * 220 * 250 mm.
Kobra 2 Neo print nozzle is a single-nozzle structure and does not support two-color printing.
Kobra 2 Neo comes standard with a 0.4mm nozzle, which supports an accuracy range of 0.05-0.28mm.
Kobra 2 Neo only supports 1.75mm diameter filaments.
Kobra 2 Neo supports printing via the Type-C interface.
Kobra 2 Neo power supply has two gears: 115V and 230V. Input: AC.100-240V .
The Kobra 2 Neo machine has an overall rated power of 400W and consumes less power.
Kobra 2 Neo nozzle temperature can support up to 260℃, hot bed temperature can support up to 110℃
Kobra 2 Neo supports power-off resume function.
Kobra 2 Neo has a material break detection function. The material break detection module is optional.
Kobra 2 Neo machine is a single motor single screw.
Kobra 2 Neo currently supports Chinese and English language switching.
The recommended printing speed of Kobra 2 Neo is 150mm/s, the maximum printing speed is 250mm/s, and the printing time of the boat is 40min (layer thickness 0.2mm).
If you do not need to continue printing the model, you can turn off the machine first.
Normal room temperature is sufficient. If the ambient temperature is below 10 degrees, the hot bed temperature needs to be raised to around 70 degrees for printing. The recommended ambient temperature is 8℃-40℃.
If the previous troubleshooting methods were unsuccessful in resolving the issue. we recommend that you create a support ticket. The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: