¶ 1.Tools :
S2.5 hex key
¶ 2.Replacement Steps:
¶ Step 1: Turn off the Printer
Before starting the replacement, make sure to turn off the printer and disconnect the power to ensure safe operations.
¶ Step 2: Remove the Control Screen Ribbon Cable
Disconnect the terminal of the control screen cable.
¶ Step 3: Disassemble the Bottom Plate
①Use the S2.5 hex key to remove the fixed screws of the bottom plate.
②Disconnect the terminal of the cooling fan and remove the printer bottom plate.
¶ Step 4: Replace the Control Screen Ribbon Cable
①Remove the control screen cable connected to the mainboard.
②Replace the control screen cable and reconnect its terminal to the mainboard port.
¶ Step 5: Install the Printer Bottom Plate
①Connect the cooling fan's wiring connector back to the mainboard port.
②Use the S2.5 hex key to reinstall and secure the bottom plate.
¶ Step 6: Reconnect the Ribbon Cable
Reconnect the cable terminal from the control screen.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: