¶ 1.Tools：
- S2.0 hex key
- S2.5 hex key
¶ 2.Replacement Steps:
¶ Step 1: Turn off the Printer
Before proceeding with the replacement, ensure that the printer is turned off and disconnect the power to ensure safe operations.
¶ Step 2: Disconnect the Control Screen FPC Cable
Unplug the FPC cable from the control screen.
¶ Step 3: Disassemble the Bottom Plate
① Use an S2.5 hex key to remove the fixed screws of the bottom plate.
② Disconnect the cooling fan connector.
③ Pull the FPC cable of the control screen out through the reserved hole in the bottom plate and remove the printer's bottom plate.
¶ Step 4: Remove the Mainboard Cooling Fan
Use an S2.0 hex key to remove the fixed screws of the cooling fan and take off the cooling fan.
¶ Step 5: Replace the Mainboard Cooling Fan
Use an S2.0 hex key to reinstall and secure the cooling fan in place.
¶ Step 6: Install the Bottom Plate
① Thread the FPC cable of the control screen through the bottom plate and reconnect the cooling fan's connector to the mainboard.
② Use an S2.5 hex key to reinstall and secure the bottom plate.
¶ Step 7: Reconnect the FPC Cable
Reconnect the FPC cable of the control screen to the corresponding port on the control screen.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page