Before proceeding with the replacement, ensure that the printer turned off and disconneche power to ensure safe operations.
Use an M2.0 hex key to remove the screws fixing the casing.
①Disconnect the wires from the X-axis motor.
②Use an S2.0 hex key to remove the screws securing the motor and take off the PE wire.
①Replace the motor, ensuring the X-axis belt is fitted into the motor's timing pulley.
②Use an S2.0 hex key to secure the motor with three screws.
③Thread the bottom-left screw through the PE wire and secure it with an S2.0 hex key.
④Reconnect the wires to the port.
Reattach the casing and secure it with an S2.0 hex key.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page