¶ 1. Tools:
S2.0 Allen Key
S2.5 Allen Key
¶ 2. Disassembly Steps:
¶ Step 1: Turn off the Printer
Before replacing the X-axis belt, make sure to turn off the printer and disconnect the power for safe operation.
¶ Step 2: Disassemble the Print Head
Use the S2.5 Allen Key to unscrew the 4 screws securing the print head and place the print head aside.
¶ Step 3: Disassemble the X-Axis Belt Tensioner and X-Axis Limit Cover
① Rotate the red knob on the X-axis belt tensioner counterclockwise and remove it.
② Use the S2.0 Allen Key to unscrew the 2 screws securing the X-axis belt tensioner and remove the outer casing of the X-axis belt tensioner.
③ Disconnect the wire from the X-axis limit switch on the other side of the aluminum profile.
④ Use the S2.5 Allen Key to unscrew the 1 screw securing the X-axis limit cover and remove the X-axis limit cover.
¶ Step 4: Disassemble the Belt
① With your hand, follow the belt from the loose part to the sheet metal fixing point, and then remove it.
② Remove the tensioner pulley from the left side and set it aside for later installation.
③ Pull out the belt from the X-axis profile.
Note:That due to inconsistent internal spacing of the profile, the belt's copper buckle may get stuck.
In such cases, please move the stuck copper buckle from the direction of the larger space to ensure smooth removal of the belt.
