The Kobra 2 printer has been calibrated before leaving the factory. After completing the operation according to the novice guide function of the machine, it can print directly. If the machine is abnormal due to transportation reasons, we may need to manually calibrate it to ensure that the printer is working properly。
¶ 1. Tools：
H10 Wrench*1
S2.5 Allen key*1
Feed tray*1
¶ 2. X-axis component calibration：
¶ Step 1: Check the X-axis component level
If the X-axis assembly is tilted, please follow the steps below to calibrate it.
1. Keep the X-axis synchronous belt in a relaxed state before calibration.
2. Use the S2.5 Allen key to loosen the fixing screw.
3. Pull the synchronous belt to move the X-axis assembly to the material tray, so that the X-axis assembly presses the material tray.
4. Use your hands to apply downward pressure to the X-axis assembly.
5. While applying downward pressure, use the S2.5 Allen key to tighten the fixing screw.
6. The calibration is completed and the X-axis timing belt is in a tightened state.
¶ 3.Other
If the previous troubleshooting methods were unsuccessful in resolving the issue. we recommend that you create a support ticket. The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page