The height pause command can provide more printing skills and more printing methods.
Kobra 3 series supports: M600, M601 commands
Software: Anycubic Slicer Next above version number v1.3.1 above
After the model slicing is completed in Anycubic Slicer Next software, switch to "Preview" and move to the desired layer height on the right.
Method 1: Custom add
1. Move the mouse pointer to the layer preview bar, right-click the mouse to pop up the selection box. Select "Add Custom G-code".
2.Enter the "M600" command in the custom G-code box (pay attention to the capitalization of the command), click "OK" to re-slice.
3.The mobile layer preview bar can see the custom G-code instructions.
Method 2: Pause command
Use the pause command (M600) to add custom commands manually without the need to do so in one step.
Move the mouse pointer to the layer preview bar and right-click to pop up the selection box. Select "Add Pause".
Click "×" after the command in the layer preview bar to delete the command.
When the printer executes the command, the machine will pause and you need to manually confirm to resume printing.