Precaution: Before replacing this part, wait for the print head temperature to cool down to room temperature before starting the operation to prevent burns.
¶ 1.Disassembly Steps:
¶ Step 1: Turn off the Printer
Before proceeding with the replacement, make sure to turn off the printer and disconnect the power to ensure safe operations.
¶ Step 2: Raise the Z-axis to the Middle Position
Rotate the left Z-axis motor coupling clockwise to lift the Z-axis to the middle position as shown in the diagram below.
¶ Step 3: Remove the Old Heat Block Silicone Sleeve
After the print head has completely cooled down, use your hand to pull the silicone sleeve off the hot end downward.
¶ 2.Installation Steps:
¶ Step 1: Replace the silicone sock
Take out the replacement silicone sleeve and reinstall it onto the hot end.
Note: Ensure that the hole of the heat block silicone sleeve is aligned in the front with the nozzle of the print head.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page