¶ (Temporarily use DIY kit)
●Eight-input and one-output DIY model file:
Combined eight-color printing kit, install the black quick connector into the top interface of the module.
You can try to take out the push head from the original 4-input 1-output kit and put it in the DIY kit. If the push head (black) is damaged during the removal process, you can contact the official customer service to purchase some additional push heads.（SKU：L03011303，Ø7.6*4.2mm、Blue snap ring: L03010474）
Note: Two ACE Pro are required for eight-color printing.
Disclaimer:
This model has been customized and voluntarily provided by enthusiastic users from the community, based on publicly available models. While the kit has been tested by users, we cannot guarantee its stability or compatibility in all situations. Please note that this is an unofficial DIY tool, and using it is at your own risk.
Our company is actively developing and will soon release an official converter, which will undergo rigorous quality testing to ensure greater stability and reliability for 8-color printing. We appreciate your understanding and support.
¶ 1. Tools:
●S2.0 Allen key
¶ 2. Disassembly steps:
¶ Step 1: Turn off the device
Before replacing the eight-input and one-output kit, make sure to turn off the printer and disconnect the power cord to ensure safe operation.
¶ Step 2: Connect the multi-color box
Put the two multi-color boxes on both sides of the printer, use one signal line to connect the two ACE Pro, and another signal line to connect the printer and one cartridge.
¶ Step 3: Replace the eight-input and one-output module
① Unplug the original four-input and one-output Teflon tube.
②Use an S2.0 Allen key to unscrew the four-input and one-output module.
③Install the eight-input and one-output module and fix it with an S2.0 Allen key.
④Connect the Teflon tubes of the two multi-color boxes to the top interface of the eight-input and one-output module.
⑤Install the blue buckle of the quick connector.
¶ Step 4: Check the connection
Turn on the machine and click on the main interface to check whether the two multi-color boxes are connected successfully.
