Note: Before replacement, the Teflon tube on the 4-in-1 hub needs to be removed
¶ 1. Required tools
●S1.5 Allen key
●S2.0 Allen key
●S2.5 Allen key
¶ 2. Disassembly steps:
¶ Step 1: Turn off the printer
Before replacing the Y-axis belt, make sure to turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Disassemble the print head module
① Remove the print head module from the back of the printer and use the S2.5 Allen key to unscrew the screws that fix the print head module.
② Use the S2.0 Allen key to unscrew the screws that fix the hub 4-in-1.
③ Use the S1.5 Allen key to unscrew the fixing screws that fix the print head cable.
④ Unplug the wiring plug connected to the extruder motor.