¶ 1.Tools:
- S2.5 Allen key
¶ 2.Disassembly steps:
¶ Step 1: Turn off the printer
Before replacing, please turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Remove multicolor shell
Use an S2.5 Allen key to unscrew the two screws holding the multicolor shell, then detach the ACE Pro inner shell.
¶ Step 3: Remove the filament detector
① Use the S2.5 Allen key to unscrew the two screws fixing the filament detector.
② Pull out the feed detection switch cable and remove the old filament detector.
¶ 3.Installation steps：
¶ Step 1: Install the filament detector
① Replace the new filament detector, and then connect the cable back to the feed detection board.
② Align the filament detector with the screw holes, and tighten the two screws securing the filament detector using an S2.5 Allen key.
¶ Step 2: Install multicolor shell
Install the multicolor shell, then use the S2.5 Allen key to tighten the two screws holding the multicolor shell in place.
