¶ 1. Bind the printer
¶ Step 1: Connect to the WLAN
1. Click "Settings" - "Cloud" - "WLAN", and then reset the network.
2.Select the name of the WiFi you want to connect to, and enter the WiFi password. The WiFi connection is successful.
¶ Step 2: Scan code to add printer
1. Open the "Anycubic APP", click "Add printer", select "Anycubic Kobra 3", and then click "Scan".
2.Use the phone to scan the CN code on the printer, and the printer is successfully added.
¶ Step 3: Add printer by Bluetooth
Note: If the connection fails by scanning the code, please try using Bluetooth to bind the printer.
1. Open the "Anycubic APP", click "Add Printer", select "Anycubic Kobra 3", and then click "Bluetooth addition".
2.Reset the network from the printer first, then click "Network has been reset, next step"
3.Select the printer Bluetooth name you want to connect to and view it on the printer screen. After the printer Bluetooth connection is successful, select the WiFi name and enter the WiFi password. The printer added successfully.
¶ 2. Update the firmware
¶ Step 1: OTA upgrade the firmware
1. Click "Settings", drop down the page, and then click "About Machine" - "Printer information".
2.When the printer prompts for firmware update, click "Confirm". After the firmware is downloaded, the device will restart, and the firmware is updated successfully.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: