¶ 1.Tools:
- S1.5 allen key
- S2.5 allen key
¶ 2.Disassembly Steps:
¶ Step 1: Turn off the printer
Before disassembly, please turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Remove the printer head cable
1.Use S1.5 allen key to remove the two screws securing the printer head cable.
2.Unplug the printer head cable and remove the printer head cable from the clip.
¶ Step 3: Disassemble the bottom plate
1.Use S2.5 allen key to remove two screws on the bottom plate.
2.Unplug the fan cable and remove the bottom plate.
¶ Step 4: Unplug the printer head cable
Cut off the tie and unplug the printer head cable connected to the motherboard.
¶ 3.Installation Steps:
¶ Step 1: Replace the printer head cable
Connect the new printer head cable back to the motherboard port and secure it with a tie.
¶ Step 2: Install the bottom plate
1.Reconnect the fan cable back to the mainboard port.
2.Use S2.5 allen key to tighten two screws fixing the bottom plate and install the bottom plate.
¶ Step 3: Reconnect the printer head cable
1.Secure the printer head cable to the clip, then insert the printer head cable back into the interface.
2.Use S1.5 allen key to tighten the two screws securing the printer head cable.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: