¶ 1.Caution:
After replacing the Y-axis belt, resonance compensation and leveling need to be performed again.
¶ 2.Tools：
S2.0 Allen key*1
S2.5 Allen key*1
¶ 3.Disassembly Steps：
¶ Step 1: Security Check
|
|
¶ Step 2: Disassemble the Hotbed
|
|
|
¶ Step 3: Remove the Y-axis tensioner
|
|
|
¶ Step 4: Remove the Y-axis timing belt
|
 |
 |
¶ 4.Installation steps:
¶ Step 1: Install timing belt
Replace with new timing belt
|
|
|
|
¶ Step 2: Install Y-axis tensioner
|
|
|
¶ Step 3: Install the Hotbed
|
|
|
¶ Step 4：Recalibrate Resonance Calibration and auto-leveling
 1.Click“Tools”-“Control”-“Resonance Calibration” |
 2. After completing vibration compensation, perform automatic leveling, click "Tools" - "Control" - "Automatic Leveling" |