¶ ●Eight-input and one-output DIY model file:
Combined eight-color printing kit, install the black quick connector into the top interface of the module.
You can try to take out the push head from the original 4-input 1-output kit and put it in the DIY kit. If the push head (black) is damaged during the removal process, you can contact the official customer service to purchase some additional push heads.（SKU：L03011303，Ø7.6*4.2mm、Blue snap ring: L03010474）
Note: Two ACE Pro are required for eight-color printing.
Disclaimer:
This model has been customized and voluntarily provided by enthusiastic users from the community, based on publicly available models. While the kit has been tested by users, we cannot guarantee its stability or compatibility in all situations. Please note that this is an unofficial DIY tool, and using it is at your own risk.
¶ 1. Tools:
- S2.5 Allen key
¶ 2. Disassembly steps:
¶ Step 1: Turn off the device
Before replacing the 8-input and 1-output kit, make sure to turn off the printer and disconnect the power cord to ensure safe operation.
¶ Step 2: Connect ACE Pro
Place two ACE Pros on both sides of the printer, use a signal line to connect the two ACE Pros, and another signal line to connect the printer and a material box.
¶ Step 3: Replace the 8-input and 1-output module
① Unplug the original 4-input and 1-output material pipe connection.
② Use the S2.5 Allen key to unscrew the 4-input and 1-output module.
③ Install the 8-input and 1-output module and fix it with the S2.5 Allen key.
④ Connect the material pipes of the two ACE Pros to the top interface of the 8-input and 1-output module.
