¶ Preparation before connection:
1. Connect to the router WiFi signal band 2.4GHz, do not support 5GHz signal band.
2. Only connect to the 2.4GHz signal band, do not support WiFi with mixed 2.4GH and 5GHz bands.
3. Do not support networks with secondary authentication.
4. Do not support network proxy connection.
¶ 1. Scan the code to bind the printer
¶ Step 1: Connect to WLAN
1. Click "Settings" - "Network" - "WLAN", and then reset the network.
2. Select the WiFi name you want to connect to, then enter the WiFi password, and the WiFi connection is successful.
3. A cloud icon appears in the upper right corner, and the server connection is successful.
¶ Network connection failed FAQ
1. The WiFi signal band of the router is 2.4GHz, and the 5GHz signal band is not supported.
2. It can only connect to the 2.4G signal band, and the connection is not supported.
3. Networks with secondary authentication are not supported.
4. Check whether the WiFi password is entered correctly.
5. Network proxy connection is not supported.
¶ Step 2: Scan code to add printer
1. Open the "Anycubic APP", click "Add printer", select "Anycubic Kobra 3", and then click "Scan".
2.Use the phone to scan the CN code on the printer, and the printer is successfully added.
¶ 2. Bluetooth binding printer
¶ Step 1: Add printer by Bluetooth
1. Open the "Anycubic APP", click "Add Printer", select "Anycubic Kobra 3", and then click "Bluetooth addition".
2.Reset the network from the printer first, then click "Network has been reset, next step"
3.Select the printer Bluetooth name you want to connect to and view it on the printer screen. After the printer Bluetooth connection is successful, select the WiFi name and enter the WiFi password. The printer added successfully.
