¶ Tips:
Replacing the X-axis motor adapter plate requires power off.
¶ 1. Tools
S2.5 Allen Key
¶ 2. Disassembly steps:
¶ Step 1: Remove the X-axis motor harness
1. Press the latch and remove the X-axis motor harness (orange) downwards.
2.Remove the X-axis motor harness.
¶ Step 2: Remove the X-axis housing
1. Use an S2.5 Allen Key to unscrew the X-axis housing fixing screws and remove the X-axis housing.
2. Remove the X-axis motor adapter plate upwards.
¶ 3. Installation steps:
¶ Step 1: Install the X-axis motor adapter plate
Install the X-axis motor adapter plate as shown in the figure.
¶ Step 2: Install the X-axis housing
1. Use an S2.5 Allen Key to tighten the X-axis housing fixing screws.
2.Install the X-axis motor adapter board harness, and plug the X-axis motor connecting wire (orange) into the X-axis motor adapter board terminal.
