¶ 1. Tools
● S2.5 Allen key
● S3.0 Allen key
¶ 2. Replacement steps:
¶ Step 1: Turn off the printer
Before replacing accessories, make sure to turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Remove the belt tensioner
① Use the S2.5 Allen key to unscrew the belt tension adjustment screw.
② Use the S3.0 Allen key to unscrew the screws that fix the tensioner and remove the tensioner.
¶ 3. Rear motor replacement steps:
¶ Step 1: Rear Y motor removal
① Unplug the Y motor connection wire.
② Use the S2.5 Allen key to unscrew the screws that fix the Y motor.
③ Tilt the motor synchronous wheel to separate the belt and motor.
¶ Step 2: Install the rear Y motor
① Take out the replacement motor and tilt the motor to insert the Y-axis belt.
② Use the S2.5 Allen key to install the motor screws.
¶ 4. Front-end motor replacement steps:
¶ Step 1: Remove the bottom cover of the printer
①Use an S2.5 Allen key to unscrew the screws that fix the bottom cover.
②Separate the cooling fan cable and remove the bottom cover.
¶ Step 2: Remove the front Y motor
①Remove the front decorative cover of the printer.
