¶ 1. Tools
S2.0 Allen Key*1
¶ 2. Disassembly steps:
¶ Step 1: Remove the feed tube
1. Press the black pressing head downward and pull the white feed tube upward.
¶ Step 2: Remove the ACE Pro Return detection module
1. Use an S2.0 Allen Key to unscrew the four-input and one-output assembly fixing screws.
2.Press the buckle and pull out the signal cable.
3.Use the S2.0 Allen Key to unscrew the fixing screws of the multi-color material rejection detection module.
¶ 3. Installation steps:
¶ Step 1: ACE Pro Return detection module
Use S2.0 Allen Key to tighten the fixing screws of ACE Pro Return detection module.
¶ Step 2: Install the four-input and one-output assembly
1. Use an S2.0 Allen Key to tighten the fixing screws of the four-input and one-output assembly.
2.Insert the 6P signal line into the signal board terminal.
3.Insert the feed tube into the ACE Pro Return detection module.
