¶ Why Replace
1. If the left and right sides are deformed or damaged due to transportation, you can choose to replace.
2. If some parts need to be replaced, you can use it as a reference step for replacement.
¶ 1. Tools
S2.0 Allen wrench*1
¶ 2. Disassembly steps:
¶ Step 1: Remove the rear cover
Use the S2.0 Allen wrench to unscrew the rear cover fixing screws.
2. Unplug the auxiliary cooling fan plug
¶ Step 2: Remove the two side covers
1. Use the S2.0 Allen wrench to unscrew the top side cover fixing screws.
2. Use the S2.0 Allen wrench to unscrew the bottom side cover fixing screws.
¶ Step 3: Remove the front door
Use the S2.0 Allen wrench to unscrew the front door fixing screws.
¶ Step 4: Disassemble the control screen assembly
1. Open the baffle of the control screen cable, tear off the tape fixing the cable and then unplug the control screen cable.
2. Use an S2.0 Allen wrench to unscrew the screws of the control screen assembly.
¶ Step 5: Remove the front cover
1. Use an S2.0 Allen wrench to unscrew the bottom screws of the bottom front cover.
2. Use an S2.0 Allen wrench to unscrew the front cover screws.
¶ 3. Installation steps:
¶ Step 1: Install the front cover
Use an S2.0 Allen wrench to tighten the front cover screws.
¶ Step 2: Install the control screen assembly
1. Use an S2.0 Allen wrench to tighten the touch screen assembly screws.
2. Open the baffle of the control screen cable, connect the cable back to the control screen, and then cover the baffle.
¶ Step 3: Install the two side covers
1. Use an S2.0 Allen wrench to tighten the top side cover screws.
2. Use an S2.0 Allen wrench to tighten the bottom side cover and front cover screws.
¶ Step 4: Install the front door
Use an S2.0 Allen wrench to tighten the front door fixing screws.
¶ Step 5: Install the rear cover
1. Plug the auxiliary cooling fan plug into the motherboard terminal.
2. Use an S2.0 Allen wrench to tighten the rear cover fixing screws.
