¶ Tools:
S2.0 Allen key
S2.5 Allen key
Tweezers
¶ 1. Disassembly steps:
¶ Step 1: Disassemble the Nozzle Cleaning Module
Remove the Nozzle Cleaning Module outwards.
¶ Step 2: Remove the back cover
Use the S2.0 Allen key to unscrew the rear cover fixing screws.
¶ 2. Installation steps:
¶ Step 1: Install the module
1. Take out the new Nozzle Cleaning Module and align the holes at the back.
2.Go to the back of the machine and use tweezers to pull out the Nozzle Cleaning Module fixing feet.
¶ Step 2: Install the rear cover
Use an S2.0 Allen key to tighten the rear cover fixing screws.