Remove the filaments from the ACE Pro.
1. Press the black clamp and pull the Teflon tube upward.
2. Press the 6P plug buckle and pull the 6P plug outward.
3. Use an S2.0 hexagonal wrench to unscrew the bracket and the blocking module fixing screws.
4.Press the black clip upwards and remove the four Teflon tubes from the four-inlet and one-outlet assembly at the same time.
1. Remove the blue buckle, press the black buckle and remove the Teflon tube at the same time.
2.Put the four Teflon tubes into a PE bag and put it inside the box.
Place other accessories in the tool box(Spool Holder*1、Signal Cable*1、U-Disk*1、Screws*4、Nozzle Cleaner*1、Grease*1、Anti-blocking Module*1、Activated Carbon*1、Nozzle Cleaning*1、Nozzle Silicone Part*1、Cable Organizer*2、Power Cord*2、Filament Sample*1)
1. Return the machine to zero, then click the Z axis to drop to the lowest point, and pull the timing belt by hand to make the hot bed contact with the base plate.
3. Place the hot bed bracket on the hot bed and tighten the hot bed bracket fixing screws using an S2.0 Allen key.