¶ FDM Machine
¶ Core XY structure (S1 series)
| Touch Screen | Display printing parameters and control printer |
| USB flash drive | The downloaded model can be directly connected to the machine for printing without considering the network conditions. In addition, it can also be used for time-lapse photography to save the pictures during printing. |
| Printhead | This assembly contains multiple parts such as extruder, hot end, tool head plate, etc. |
| Camera | The camera integrated in the printer is used for AI detection and equipped with monitoring function, which can monitor the printing screen in real time. |
| Spring Steel | Serves as the surface of the build platform. Spring steel provides a strong yet flexible surface that helps the finished part to be easily peeled off the print bed after cooling. |
| Hotbed | The hot bed is an important part of the printer. It is used to heat the printing surface and help the printed layer adhere better to the frame plate. It plays an important role in improving printing quality and reducing failure rate. Depending on the material used, adjusting the appropriate hot bed temperature is one of the key factors to ensure successful printing. |
| X/Y axis optical rail | CoreXY motion system is used. The printer with CoreXY motion system is faster because it is lighter, which is very important for fast printing. |
| X/Y belt | The print head is driven by the motor |
| Z-axis screw | For up and down movement of heated bed |
| Filament Tube | Used to connect ace with four-input and one-output components to print multiple colors |
| Excess Chute | Channel for discharging waste consumables |
|
Spool Holder Installation Port |
Used for printing monochrome, placing and supporting the printer's consumable roll |
| Filament Hub | Used to connect Teflon tubes and installed on the blocking module |
| Material breakage detection module | Combined with the four-input and one-output components to form a material blocking component to detect material blocking |
| ACE Pro Signal Cable | Connect ace pro to the machine |
| Power port | Connect the machine for power on |
Printhead
| Extruder module | Double gear short-range extrusion, used to transport extrusion consumables |
| Cutter assembly | Extruder blockage, used to cut off the consumables, to facilitate the removal of consumables and clean up the remaining consumables |
| Heat sink | Cooling pipes to prevent overheating |
| Pressure lever handle | Used to fix the hot end to prevent it from falling off |
| Silicone protective cover | Protect the hot end and hot end cable from damage due to high temperatures |
| Hot End | Heat the Hubei to melt the consumables to ensure smooth extrusion of the consumables |
| Hot end cooling fan | Used for heat dissipation during printing |
| Strain gauges | Inductive automatic leveling function, |
| Print head housing | Used to protect important parts such as extruders |
¶ Gantry structure
K3 Series
| Filament tube | Consumables transmission channel, connecting four-input and one-output components |
| x-axis motor | Control the movement of the print head in the x-axis direction |
| Printhead | This assembly contains multiple parts, such as extruder, hot end, print head adapter plate, etc. |
| Z-axis motor | Control the movement of the X axis |
| Y-axis belt tensioner | Adjust the tightness of the Y-axis belt to drive the hot bed to move |
| cameras and Other Peripherals | For connecting camera, USB flash drive |
| Lead Screw | Connected to the z-axis motor to move the X-axis up and down |
| X-axis belts tensioner | Adjust the tightness of the X belt to drive the movement of the print head |
| Cable holder | Used to fix the filament tube and print head signal line |
| Y-axis motor | Control the movement of the heated bed |
| Build Platform | It is composed of a hot bed and spring steel, a carrier for model forming. |
| Touch screen | Display printing parameters and control printer |
| Spool Holder | Used for printing monochrome, placing and supporting the printer's consumable roll |
K2 Series
| Filament tube | Channel for feeding consumables |
| Filament Runout sensor | Check whether consumables are loaded |
| Printhead | This assembly contains multiple parts, such as extruder, hot end, print head adapter plate, etc. |
| Filament holder | It is used to place and support the printer's filament roll to prevent it from getting tangled or stuck during printing, thus ensuring the stability and smoothness of the printing process. |
| antenna | Receiving network signal |
| Camera and other peripherals | For connecting camera, USB flash drive |
| Touch screen | Display printing parameters and control printer |
| Build Platform | It is composed of a hot bed and spring steel, a carrier for model forming. |
| X-axis belt tensioner | Adjust the tightness of the X belt to drive the movement of the print head |
| Supporting rod. | Make the machine run more stable |
| Lead Screw | Connected to the z-axis motor to move the X-axis up and down |
| E-axis motor | The extruder motor drives the extruder gear to rotate, making it easier to feed and extrude consumables. |
| X-axis motor | Control the movement of the print head in the x-axis direction |
| Y-axis motor | Control the movement of the heated bed |
| Z-axis motor | Control the movement of the X axis |
| Y-axis belt tensioner | Adjust the tightness of the Y-axis belt to drive the hot bed to move |
¶
LCD Machine
| cover | The hood can be put on during printing to prevent the resin smell from spreading |
| Print platform | Model forming carrier |
| Air Heat & Pure | Purify the smell of resin to prevent harm to human health |
| Resin Vat | Used to store liquid resin, to support printing, curing, etc., and to support automatic heating and other functions |
| Touch screen | Display printing parameters and control the machine |
| z-axis | The z-axis motor, lead screw, and slide rail make up the z-axis, which moves the printing platform up and down. |
| USB Port | Used to download and store models for printing |
| Auto-fill Unit | Device for automatic feeding and unloading of resin |
¶
Cleaning Machine
Wash & Cure MAX
| 1. Control Panel | Set working mode and time |
| 2. Door | Blocks UV light and liquids |
| 3. Tray | Loading models during cleaning and curing |
| 4. Strainer | Filter out foreign matter such as resin residues that have fallen off |
| 5.UV light | For curing the model |
| 6. Sprinkler | Detergent/water spray nozzle |
| 7. Power switch | / |
| 8. Power Port | / |
| 9. Water Container | Need to fill with clean water |
| 10. Water Inlet | Water inlet pipe interface |
| 11. Detergent Container | Detergent needs to be loaded |
| 12. Detergent Inlet | Detergent inlet interface |
| 13.Detergent Outlet | Detergent outlet interface |
| 14. Bucket | Collecting waste water from cleaning |
| 15. Wastewater output | Wastewater pipe interface |
Wash & Cure 3 series
| 1. Anti-UV cover | Can block 99.995% of UV light and plays a protective role |
| 2. Control Panel | ①Set working mode and time ②Turn on/off gooseneck light |
| 3.UV LED panel | For solidifying the model as a whole |
| 4. Gooseneck light | Used to solidify model details |
| 5. Power switch | Turn the machine on/off |
| 6. Cover sensor | to check whether the cover is on |
| 7. Power socket | Power adapter connection |
¶ ACE Pro
| Cover | The lid of the multi-color box |
| Filament inlet | The feeding channel of the consumables |
| Lock | For locking the upper cover |
| Signal Cable Port | For connecting the signal |
| Buffer mechanism | The outlet of the consumables |
| Power Cord Connection Port | Connect the power cord |
| Power Switch | Button for turning on the machine |
Other Terms
| Driven wheel | assists the feeding and retracting of consumables |
| Drive wheel | connects to the belt and rotates to drive the consumables |
| Feed detection assembly | Places consumables at the feed port, automatically feeds and transports consumables |
| Motor | Drives the belt to rotate and provides power for transporting consumables |
| HUB signal board | Connects to the ACE signal line to communicate with the machine and connects to the ACE |