As shown in the diagram, The print failed and the middle part of the model in contact with the print platform is translucent.
1)The Z Lift Distance is too low, so that the newly solidified model in the middle part cannot be separated from the release film. It is recommended to add 2mm on the original basis.
2)The Off Time is too short, resulting in the exposure of the firmware model before the resin has returned to the middle part of the screen. It is recommended to add 1S on the original basis. The specific value should be set according to the exposure area of each layer after cutting.
If you have further questions, we suggest you create an after-sales ticket and our After-sales engineers will help you solve the problem. (Reply time :1 working day)
Please click this link to submit your ticket: