Photon Mono M7 Max prints as length/width/height: 297.5*164*300mm.
Photon Mono M7 Max Printing layer height range：0.01-0.15mm.
Photon Mono M7 Max The machine has a power-off resume function.
Photon Mono M7 Max Supports 8 languages (Chinese, English, German, Russian, Spanish, French, Japanese, Italian).
PhotonWork Shop currently supports：Windows 10/Windows 11/MAC.
Photon Mono M7 Max Currently only supports Auto-fill Unit.
The recommended ambient temperature is 8℃-40℃. If it is lower than that, it is recommended to turn on the resin heating function. The humidity is 20%-50%. Avoid direct sunlight/other ultraviolet light equipment.
It is necessary to regularly apply grease to the screw rod and guide rail, and replace the release film regularly (the warranty life of the release film is 45,000 layers, and testing and confirmation is required if it exceeds 45,000 layers).
This is a normal phenomenon after the screw rod has been running for a long time. It can be used normally. If accumulation or jamming occurs, the grease on the screw rod can be cleaned and reapplied.
Use an empty bottle of alcohol and use the feed and return material to clean in the advanced interface.