①Turn the plum handle of the material box counterclockwise, unscrew it and remove the material box.
②Put on gloves, turn the knob of the printing platform counterclockwise to loosen it, and then remove the printing platform.
③Pour the resin in the material box back into the resin bottle through the funnel.
④Use alcohol and paper towels to wipe the residual resin on the printing platform and the material box, and put it aside for subsequent packaging.
⑤Replace the cleaned material tank back into the printer.
①Unplug the connection line plug and feed pipe first to ensure safe operation.
②Remove the automatic feed and return bottle cap.
③Remove the WIFI antenna.
In the main interface, click "Tools"-"Move Z axis"-"Z axis zero point". Let the cantilever drop to the bottom position for subsequent packaging.
Press the power switch of the machine to turn off the device, and then unplug the power supply. Set it aside for subsequent packing.
The accessories in the tool box include funnel filter paper, S2.0/2.5/3.0 hexagonal wrench, USB flash drive, mask, gloves, film auxiliary tool kit, plastic spatula, metal spatula, equipment power cord, automatic feed bottle cap, Photon Mono M7 Max user manual and other tools.
①Take out the box and foam retained during unpacking.
②Take out the protective foam of the air purifier and automatic feeder, and put the air purifier and automatic feeder into the foam. After sorting, temporarily put it aside and wait for the subsequent steps to pack other accessories, and then put them in the corresponding position.
③Pack the foam, machine, machine accessories, and tool box one by one in the order of the pictures below, and finally pack the cartons with tape.