¶ 1. Tools:
1. S2.5 Allen key
2. S3.0 Allen key
3. S4.0 Allen key
¶ 2. Replacement steps:
¶ Step 1: Turn off the device
Before replacing accessories, make sure to turn off the printer and disconnect the power cord to ensure safe operation.
¶ Step 2: Disassemble the cantilever assembly
① Remove the handle that fixes the printing platform.
② Use the S4.0 Allen key to unscrew the cantilever fixing screws and remove the cantilever.
③ Use the S2.5 Allen key to unscrew the strain gauge assembly protective shell.
④ Use the S3.0 Allen key to unscrew the screws that fix the cantilever.
¶ Step 3: Replace the guide rail
① Use the S3.0 Allen key to unscrew the screws that fix the guide rail, replace the guide rail and then use the wrench to fix it.
¶ Step 4: Install the cantilever
① Use the S3.0 Allen key to install the cantilever fixing screws.
②Install the protective shell and use an S2.5 Allen key to fix it.
③Install the cantilever assembly and use an S4.0 Allen key to fix it.
④Reinstall the platform fixing handle.
