1. Use scissors or another sharp tool to cut the tape, remove the protective foam, and take out the printer.
2. Open the moisture-proof bag and remove the printer and leveling paper.
3. Remove the foam, then take out the tool kit, print platform, and resin vat, placing them aside.
Please organize the printer accessories according to the packing list in the manual to prepare for installation.
The anti-scratch film is already applied to the exposure screen. Peel off the protective film on top of the exposure screen, install the antenna at the back of the printer, connect the power, and press the power button on the display screen to start the printer.
On the display screen, please set the language and select the server location. Follow the prompts to complete the initialization. For mainland China, choose "China." For other countries and regions, select "Global."
Move the Z-axis to the top, and use an S4.0 hex key to loosen the four screws on the print platform. Then install the print platform and tighten the knob to secure it in place.
Place the resin vat on top of the exposure screen, and then tighten the knobs on both sides to secure it.
Note: If the knobs cannot be tightened, slightly adjust the position of the resin vat.