¶ 1. Tools :
- S2.5 hex key
¶ 2. Replacement steps:
Tip: Please lift the cantilever to the middle position first (to facilitate the replacement of the limit switch)
¶ Step 1: Turn off the printer
Before making a replacement, be sure to turn off the printer and disconnect it from the power source to ensure safe operation.
¶ Step 2: Remove the limit switch
Use an S2.5 hex wrench to loosen the two screws fixing the limit switch.
¶ Step 3: Replace the limit switch
Remove the AL wire wiring plug connected to the limit switch.
¶ Step 4: Install the limit switch
① Take out the new limit switch and reconnect the connecting wire back to the port.
② Use an S2.5 hex wrench to reinstall the fixed limit switch.
Note: Arrange the limit switch connection cable to prevent it from being affected when the screw rod rotates.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page