Photon Mono 2 machine print size length/width/height: 143.36mm*89.1mm*165mm
The Photon Mono 2 machine can print in a layer height range of 0.01-0.15mm
Photon Mono 2 machine Z-axis accuracy: 0.01mm Printing pixel size 35um.
Photon Mono 2 machine's LCD screen resolution 4096*2560 (6.6-inch 4k screen).
Photon Mono 2 machine overall power rating is 48W.
Photon Mono 2 machine does not have power-off resume function.
Photon Mono 2 This machine does not have the function of resuming printing after power failure. It is necessary to ensure that the power supply is uninterrupted during the printing process. If the power is unexpectedly cut off, it needs to be printed again.
The working environment temperature of the Photon Mono 2 machine is recommended to be 8℃-40℃, and the humidity is 20%-50%. Avoid direct sunlight/other UV equipment.
It is recommended to use Anycubic 405nm resin. The curing time of other brands of resin is different, and the printing effect and accuracy will be different. The exposure time needs to be adjusted. You can print the RERF file to determine the relative optimal curing time of the resin.
Enter the ANYCUBIC official website, find the information download in the service support column and download it.
This is a normal phenomenon after the screw has been running for a long time and can be used normally. If there is accumulation or jamming, the grease on the screw can be cleaned and re-applied.
If the previous troubleshooting methods were unsuccessful in resolving the issue. we recommend that you create a support ticket. The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: