¶ 1. Tools :
● S2.5 Allen key
● S3.0 Allen key
¶ 2. Disassembly steps:
¶ Step 1: Clean the material box
- If there is residual resin in the material box, please click "Tools"-"Material box cleaning"-"10s"
- Wear gloves and use a spatula to scoop up the residue in the material box
Note: During the operation, be careful not to scratch the release film to prevent resin leakage
- Pour the remaining resin from the front of the material box and filter the resin with a funnel, then spray alcohol on the surface of the release film and gently wipe it with a dust-free cloth until the resin stops dripping when the material box is inverted
¶ Step 2: Remove the steel ring
(1) Invert the material box and use an S2.5 Allen key to unscrew the 4 diagonal screws
(2) Use an S2.5 Allen key to unscrew the remaining 12 screws.
¶ Step 3: Replace the release film assembly
(1) Remove the release film assembly from the material box and replace it. Use an S2.5 Allen key to install and fix the new release film assembly.
(2) Use an S3.0 Allen key to install and fix the four positioning screws of the material box.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page