¶ Step 1: Unbox the machine
1.Cut the tape securing the carton and take out the packed printer.
2. Take out the packaging bag and foam, and remove the hood.
3. Take out the tool box and material box, remove the foam and packaging bags from the hood, and then take out the printing platform and set it aside.
¶ Step 2: Organize the accessories
1. Arrange the printer accessories according to the packing list in the instruction manual, so as to facilitate the installation of subsequent accessories.
¶ Step 3: Install the printing platform
1. Please open the printer, click "Tools" - "Move Z", then select "10mm" and click up 4 times.
Note: For the first time, please follow the instructions to assemble the printer and complete the printing preparation.
2. Install the printing platform and tighten the knob.
¶ Step 4: Install the resin vat
1. Place in the resin vat, insert the foot pad into the corresponding positioning hole, and tighten the knobs on both sides to complete the installation.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket: