¶ Step 1: Remove the Machine Cover
¶ Step 2: Remove the Resin vat and Print platform
①Rotate the Resin vat's plum blossom handle counterclockwise and remove the Resin vat.
②With gloves on, rotate the Print platform knob counterclockwise to loosen it, then remove the Print platform.
③Pour the resin from the tank back into the resin bottle using a funnel.
④Wipe off any remaining resin on the Print platform and Resin vat with alcohol and tissue. After cleaning, set them aside for later packing.
¶ Step 3: Disassemble the Air Heat & Pure kit
①Disconnect the power plugs on both sides of the Air Heat & Pure kit for safety.
②Since the Air Heat & Pure kit is fixed to the machine with bottom adhesive, separate it and place it aside.
¶ Step 4: Move the Arm to Zero
On the main interface, click "Tools" - "Move Z" - "Z-axis Home." Lower the arm to the bottom position for later packing.
¶ Step 5: Power off the Device
Press the power switch on the back of the machine to turn it off. Disconnect and remove the adapter interface.
Also, unplug the power cord. After separating the adapter and power cord, place them aside for later packing.
¶ Step 6: Organize Accessories in the Tool Kit
The toolbox contents include Funnel filter paper, Resin vat handles *2, S2.0/2.5/3.0 Hex key, USB drive, Mask,
Gloves, Screen protector accessories, Plastic spatula, Metal spatula, Power adapter, Power cord,
Air Heater & Purifier manual, and Photon Mono M5s Pro user manual.
¶ Step 7: Machine Packing
①Take out the box and foam kept during unboxing.
②Remove the protective foam for the Air Heat & Pure kit. Place the Air Heat & Pure kit and its power cord into the foam.
After organizing, temporarily set it aside, and wait for the subsequent steps to pack other accessories before placing it in its designated position.
③Pack the foam, machine, machine accessories, and tool kit following the sequence in the images below.
Finally, use tape to seal the cardboard box.
