¶ 1.Tools :
- S2.0Allen key
- S3.0Allen key
¶ 2.Disassembly Steps:
¶ Step 1: Turn Off the Printer
Before replacing, ensure the printer is turned off and disconnected from power for safety.
¶ Step 2: Disconnect Printer Cables
① Use S2.0Allen key to remove the screws securing the casing of the fixed resin vat.
② Disconnect the connectors linking to the resin vat.
¶ Step 3: Remove the Mainboard Cover
① Use S2.0Allen key to remove the screws securing the cover.
② Unplug the labeled connectors from the mainboard and remove the screw securing the grounding wire using a 2.0Allen key.
¶ Step 4: Dismantle the Base
① Use S3.0Allen key to remove the 10 screws securing the baseplate.
② Use S2.0Allen keyto remove the upper screws securing the power interface.
③ Pull out the cables and detach the printer base. Use a small flathead screwdriver to pry off and remove the protective sticker on the control screen.
¶ 3.Installation Steps:
¶ Step 1: Replace the Control Screen
① Push the control screen outward from the inside.
② Take out the replacement control screen and reinstall it following the disassembly direction.
③ Stick the protective sticker of the control screen back onto the machine cover.
¶ Step 2: Install the Printer Base
Install the printer base, and pass the mainboard and resin vat connector cables through the reserved holes.
¶ Step 3: Connect the Mainboard Cables
① Reconnect the mainboard connector plugs and FPC ribbon cables to the mainboard.
② Use S2.0Allen key to secure the grounding wire to the mainboard.
③ Install the mainboard cover and secure it with S2.0Allen key.
¶ Step 4: Secure the Base
① Use S3.0Allen key to secure the printer base.
② Use S2.0Allen key to secure the power interface.
¶ Step 5: Install the Resin Vat
① Reconnect the resin vat cable.
② Use S2.5Allen key to install the fixed resin vat.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page