¶ 1.Tools
- S2.0Allen key
- S3.0Allen key
¶ 2.Disassembly Steps:
¶ Step 1: Turn Off the Printer
Before replacing, ensure the printer is turned off and disconnected from power for safety.
¶ Step 2: Disconnect Printer Cables
① Use S2.0Allen key to remove the screws securing the casing of the fixed resin vat.
② Disconnect the connectors linking to the resin vat.
¶ Step 3: Remove the Mainboard Cover
① Use S2.0Allen key to remove the screws securing the cover.
② Unplug the labeled connectors from the mainboard and remove the screw securing the grounding wire using a 2.0 Allen key.
¶ Step 4: Dismantle the Base
① Use S3.0Allen key to remove the 10 screws securing the baseplate.
② Use S2.0Allen key to remove the upper screws securing the power interface.
③ Pull out the connection cable and separate the printer base.
¶ Step 5: Remove the UV lamp module
① Unplug the UV lamp wiring plug connected to the motherboard.
② Unplug the UV lamp power cord connected to the driver board.
③Use an S3.0 hex wrench to unscrew the screws fixing the UV lamp module.
④ Loosen the cable management buckle and slowly pull out the UV lamp module wiring.
¶ 3. Installation steps
¶ Step 1: Install the UV lamp module
① Connect the cable to the motherboard and driver board and put it into the line card.
