¶ 1. Tools:
●S3.0 Allen key
¶ 2. Disassembly steps:
¶ Step 1: Turn off the printer
Before replacing accessories, make sure to turn off the printer and disconnect the power supply to ensure safe operation.
¶ Step 2: Remove the base shell
①Use the S3.0 Allen key to unscrew the screws that fix the base shell.
②Unplug the wiring plug connected to the UV light board and separate the base.
③Remove the LCD screen wiring.
¶ Step 3: Remove the screen
①Tear off the black tape that fixes the screen.
②Push the screen out from the inside.
¶ 3.Installation steps
¶ Step 1: Install the screen
①Replace the screen and fix it with black fixing tape.
②Connect the LCD screen cable.
¶ Step 2: Install the base
①Install the base and reconnect the UV light cable.
②Use the S3.0 Allen key to fix the base cover.