¶ Why do you need to calibrate?
When the material tank is insufficient, please add resin or the release force is zero. If the error prompt is repeatedly and the problem has not been solved, you can refer to the following steps to troubleshoot the problem.
¶ Troubleshooting Guide
¶ Tools
S2.0 Allen key
¶ Troubleshooting steps:
¶ Step 1: Check the mechanical sensor
1. When the printing platform is not installed, you can reinstall the printing platform. If there is still a prompt, you can "stop" printing to further troubleshoot the problem.
2.Click "Other" - "Self-check" - "Force Detection" to see if the icon is green. If it is not, refer to step 2 to troubleshoot the problem.
¶ Step 2: Check the strain gauge wiring harness
1. Use an S2.0 Allen key to unscrew the adapter plate assembly and re-plug the strain gauge assembly wiring plug.
2. After re-plugging the strain gauge wiring plug, check if the error still occurs when you re-print.
If the above steps cannot solve the problem, refer to step 3 to calibrate the printing platform.
¶ Step 3: Print platform calibration
1. Click Settings->System ->About->Detailsed information.
2. Click the device name 10 times in a row.
3.Click the "Mechanical Calibration" function to enter the mechanical calibration page.
4.Remove the printing platform - click "Removed" (do not attach the model to the printing platform, and it is recommended to clean the printing platform to avoid affecting the accuracy of the data).
5.Reinstall the platform - click "Installed".
6.Click "OK" when the calibration is complete, and click any function to exit "Mechanical Calibration".
7.Calibration is complete and you can print again.