1.Check and organize packing items.
2.Place the following items in the tool box.
1.Take out the print platform and Resin vat, and reset the Z axis of the return to zero.
2.Long press the button for 2 seconds to shut down and unplug the adapter.
3.Please put the machine base into the pearl cotton.
4.Slide the pearl cotton on the upper bottom panel downwards.
5.Put Resin vat on the right side.
6.Insert the tool box on the left.
7.Place the pearl cotton on the printing platform and align it with the tool box.
8.Put the cover into the moisture-proof bag and place it downward from the top of the platform.
9.Put into the cover pearl cotton.
10.Moisture-proof bag is put into the whole machine.
11.Put the machine into the carton.
12.Seal the box with tape.
If the above steps do not provide assistance or if you encounter any other issues during subsequent use, we recommend that you create a support ticket.
The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day)
Please click this link to submit your ticket:
After-sales Ticket Submission Page