¶ Definition of time-lapse photography
If smooth or traditional mode is selected, a timelapse video will be generated for each print, After each layer is printed, a snapshot is taken with the chamber camera, All of these snapshots are composed into a timelapse video when printing completes. lf smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot, Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle.
¶ Category Introduction
Time-lapse photography is divided into traditional mode and smooth mode. You can modify it in Crafts - Others - Time-lapse photography options. The default mode of the slicing software is traditional mode.
¶ Traditional mode
Default parameters
The movement trajectory of the print head without the time-lapse option turned on
Turn on the time-lapse photography option, the movement trajectory of the print head
¶ Smooth Mode
The time-lapse photography option is not turned on, and the movement trajectory of the print head
During each printing process, the print head moves back and forth between the model and the eraser tower
Turn on the time-lapse photography option, the movement trajectory of the print head
During each printing process, the print head moves back and forth between the model, waste slide, and wiper tower.
¶ Saving time-lapse photography
Turn on the time-lapse photography option and it will be saved on the touch screen video option after printing is completed.
Then use the USB drive to export the saved video and watch it