¶ 3. Installation steps:
¶ Step 1: Insert the synchronous belt
1. Synchronous belt direction installation diagram
¶ Step 2: Install the XY axis assembly
1. After the synchronous belt is inserted, put the four fixing seats of the XY assembly flush into the machine frame to check whether the synchronous belt is in place.
2. Use the S2.0 Allen key to tighten the countersunk hexagon socket screws of the XY axis assembly.
3. Use the S2.0 Allen key to tighten the countersunk hexagon socket screws of the XY axis assembly.
¶ Step 3: Install the top frame
1. Remove the XY limit switch line and camera line.
2. Use the S2.0 Allen key to tighten the countersunk hexagon socket screws that fix the top frame and the two side fixing plates.
¶ Step 4: Install the shell
Kobra S1 shell disassembly guide: