After you receive the printer, please refer to the following user manual and unboxing video to install the printer and complete the printing preparation.
Kobra S1 Combo- Unboxing Installation Video
After the printer is installed and turned on, the printer will enter the guide program. Please set the Language and Area according to the printer's prompt, and then bind the cloud platform to the network, and finally perform vibration compensation and Auto-Level to complete the Using Guidance.
(1)Then place the filaments in ACE Pro, insert the filaments into the feed port, ACE Pro will automatically pre-load after detecting the filaments. Before placing the filaments, please learn the notes for using ACE Pro from the following documentation.
Kobra S1 Combo-Notes for ACE Pro
(2)Press the "Material" interface, then select a filament, set the corresponding material type and color, and then click "Extrude" to check whether the filaments can be extruded from the nozzle.
Note: If you use the Anycubic filaments with RFID, the printer will automatically recognize the type and color of the filaments.
Then please select the local model, check the Time-Lapse and other functions before printing, and complete the color mapping for the first test print.
Note: Turning on Time-Lapse requires turning on the camera and inserting the USB flash drive into the printer.