Introducing the Anycubic Photon Mono M5s Pro, a 3D printing marvel with a 10.1-inch monochrome LCD boasting a resolution of 13312*5120. Achieving an XY resolution of 16.824.8μm, this printer ensures precision comparable to the thickness of a hair. The enhanced 85% light uniformity guarantees impeccable details and sharp edges.
The Air Heater & Purifier module integrates air heating and purification, providing independent control and easy installation. Crafted from fire-resistant material, the printer guarantees safe and enduring operation in harsh environments. Supporting air heating for temperatures up to 40 ℃ and resin temperatures above 20 ℃ before printing, it excels in low-temperature settings. The dedicated purification mode absorbs resin odors, creating a comfortable printing environment.
With an average print speed of up to 105mm/h, the M5s Pro employs a third-generation high-speed ACF film, reducing peeling force, ensuring high success rates, lower peeling height, and increased lifting speed. Adopting a leveling-free solution through floating platform technology, it dynamically adjusts for uniform prints.
New features include resin residue detection, preventing screen breakage, and an AI algorithm adjusting peeling height in real time for enhanced success rates and speed. Compatible with the latest Anycubic APP, it simplifies high-quality printing with a single touch. The Photon Mono M5s Pro is your gateway to a new era of seamless and precise 3D printing.
Official product page:Anycubic Photon Mono M5s Pro
¶ User Manuals
¶ Product Details
¶ Printer Manual
- Assembly
- Manual
- Manual Leveling Guide
- WiFi Connection Tutorial (Method 1: App Configuration)
- WiFi Connection Guide(Method 2: USB Drive Configuration)
- Scan CN code on printer screen
¶ Setting up
In normal printing mode, it is recommended to set the layer height to 0.05mm, and the other settings are:
| Resin type Print parameter |
Basic Resin |
Plant-based Resin |
DLP Craftsman Resin |
UV Tough Resin |
Water-Wash Resin+ | ABS-Like Resin + | ABS-Like Resin Pro | High Clear Resin | ABS-Like Resin V2 | Standard Resin V2 | ABS-Like Resin Rro 2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Layers Thickness（mm） | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | |
| Normal Exposure Time（s) | 3.6 | 3.8 | 3.8 | 3.6 | 3.6 | 4 | 4 | 3.8 | 4 | 3.6 | 3.6 | |
| Off Time（s） | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
| Bottom Exposure Time（s） | 30 | 30 | 30 | 30 | 30 | 35 | 35 | 35 | 35 | 30 | 30 | |
| Bottom Layers（s） | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Z Lift Distance（mm） | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | |
| Z Lift Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| Z Retract Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
In fast printing mode, it is recommended to set the layer height to 0.1mm, and the other settings are:
| Resin type Print parameter |
Basic Resin |
Plant-based Resin |
DLP Craftsman Resin |
UV Tough Resin |
Water-Wash Resin+ | ABS-Like Resin + | ABS-Like Resin Pro | High Clear Resin | ABS-Like Resin V2 | High Speed Resin | Standard Resin V2 | ABS-Like Resin Rro 2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Layers Thickness（mm） | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | |
| Normal Exposure Time（s) | 3.8 | 4 | 4 | 4 | 3.8 | 4.2 | 4.2 | 4.5 | 4.2 | 1.9 | 3.8 | 4 | |
| Off Time（s） | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
| Bottom Exposure Time（s） | 30 | 30 | 30 | 30 | 30 | 35 | 35 | 35 | 35 | 10 | 30 | 30 | |
| Bottom Layers（s） | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Z Lift Distance（mm） | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 3 | 5 | 5 | |
| Z Lift Speed（mm/s） | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | |
| Z Retract Speed（mm/s） | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | |
¶ Troubleshooting
- Handling of Abnormal Pop-up Windows
- Troubleshooting for Models Not Sticking to the print platform During Printing
- USB Recognition Issue
- WiFi connect failed
¶ Maintenance
- Packing Process
- Maintenance Suggestions
- Strain Gauge Assembly Replacement Guide
- UV Lamp Replacement Guide
¶ WiFi Antenna
¶ Z-Axis
¶ Download Center
¶ Firmware
Coming Soon.
¶ Manual
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_EN
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_DE
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_ES
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_FR
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_IT
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_JP
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_RU
- Anycubic Photon Mono M5s Pro_User Manual_v0.0.4_ZH
¶ Slicer Software
¶ User Manual
- User_Manual_v0.1.9_EN
- User_Manual_v0.1.9_DE
- User_Manual_v0.1.9_ES
- User_Manual_v0.1.9_FR
- User_Manual_v0.1.9_IT
- User_Manual_v0.1.9_JP
- User_Manual_v0.1.9_RU
- User_Manual_v0.1.9_ZH