The Anycubic Photon Mono M5s boasts a remarkable 12K ultra-high precision and is the first consumer grade self-leveling LCD new product. When paired with high-speed resin, it enables three times faster printing speed. It is intelligent, user-friendly, and highly efficient. Please refer to this module for the usage-related information on the M5s machine.
Official product page:Anycubic Photon Mono M5s
¶ User Manuals
¶ Product Details
¶ Printer Manual
- Manual
- Assembly
- WiFi Connection Tutorial (Method 1: App Configuration)
- WiFi Connection Guide(Method 2: USB Drive Configuration)
- Scan CN code on printer screen
¶ Setting up
| Resin type Print parameter |
UV Sensitive Resin | Plant-based Resin | Plant based Resin+ | UV Tough Resin | DLP Craftsman Resin | Water-Wash Resin | ABS-Like Resin + | |
|---|---|---|---|---|---|---|---|---|
| Layers Thickness（mm） | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | |
| Normal Exposure Time（s) | 2.8 | 2.8 | 2.8 | 3 | 3 | 2.8 | 2.8 | |
| Off Time（s） | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
| Bottom Exposure Time（s） | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
| Bottom Layers（s） | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Z Lift Distance（mm） | 8 | 8 | 8 | 8 | 8 | 8 | 8 | |
| Z Lift Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| Z Retract Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
For 3X High-Speed Printing, please refer to this article，Guide to Using 3x High-Speed Printing.
¶ Maintenance
- Maintenance Suggestions
- Residue Cleaning Operation Video
- Build plate Replacement Guide
- FEP Film Repalcement Guide
- Lead Screw Motor Replacement Guide
- Resin Vat Film Replacement Guide
- LCD Screen Replacement Guide
- Touch Screen Replacement Guide
- UV Lamp Replacement Guide
- Motherboard Replacement Guide
¶ Troubleshooting
- General Knowledge
- Printer Fails To Start
- Screen Connection Status Error
- Force Detection Fault (Sensor fault)
- Motor Status Error
- WiFi Connection Failure Troubleshooting
- USB Not Reading
- Layered Monitoring Error
- Drop Bottom Monitoring Error
- Leveling Monitoring Error
- Resin Monitoring Error
- Compilation Of Printer Error Pop-up Windows And Tutorial Instructions
- Models Not Sticking to the Printing Plate During Printing
¶ Download Center
¶ Firmware
¶ Manual
- Anycubic Photon Mono M5s_User Manual_v0.0.6_EN
- Anycubic Photon Mono M5s_User Manual_v0.0.6_DE
- Anycubic Photon Mono M5s_User Manual_v0.0.6_ES
- Anycubic Photon Mono M5s_User Manual_v0.0.6_FR
- Anycubic Photon Mono M5s_User Manual_v0.0.6_IT
- Anycubic Photon Mono M5s_User Manual_v0.0.6_JP
- Anycubic Photon Mono M5s_User Manual_v0.0.6_RU
- Anycubic Photon Mono M5s_User Manual_v0.0.6_ZH
- Anycubic Photon Workshop V3.1.4
¶ Photon Workshop V3.14
¶ Software
¶ User Manual
- User_Manual_v0.1.9_EN
- User_Manual_v0.1.9_DE
- User_Manual_v0.1.9_ES
- User_Manual_v0.1.9_FR
- User_Manual_v0.1.9_IT
- User_Manual_v0.1.9_JP
- User_Manual_v0.1.9_RU
- User_Manual_v0.1.9_ZH