The Kobra 2 Pro features high-speed printing capabilities. For everyday use, it can achieve a recommended printing speed of 300mm/s. Compared to other mainstream FDM printers, it offers a 10-fold increase in printing speed, resulting in time savings and lower energy consumption.
With the new version of Anycubic APP, remote networking, firmware upgrading, and real-time viewing of printer status are achievable.Future updates will also support online slicing and printing, video monitoring and time-lapse photography,remote control and management, and an open model library function module, kick-starting a "smart"
Leviq 2.0 Auto Leveling: Featuring the advanced Leviq 2.0 auto leveling technology, this printer ensures optimal bed leveling for precise and consistent prints. It is totally a cost-effective printer.
Official product page: Anycubic Kobra 2 Pro
¶ User Manuals
¶ Product Details
¶ Printer Manuals
- Assemby
- Manual
- Leveling Calibration Guide
- Basic Slicing Software Operation Guide Video
- How To Change Filament During The Printing Process
- Camera Installation Guide
- Kobra 2 Pro-FAQ
¶ Setting up
- PrusaSlicer
- Please note：For the use of files, please refer to the document PrusaSlicer Installation And Parameter Import Guide V1.1
- Download：Filaments for PrusaSlicer Settings
- Ultimaker Cura
- Download: Filaments for Cura Settings
- AnycubicSlicer
- Please note：
After repeated testing, Anycubic has provided filament profiles for the machine in the AnycubicSlicer to achieve the best printing results.
Additionally, some capacities are exclusively available within the AnycubicSlicer.
Thus, we highly recommend using AnycubicSlicer.
lf still preferring to use Prusa Slicer or Cura for slicing, please use the official recommended configuration files to achieve better printing results.
- Please note：
¶ Troubleshooting
- Kobra 2 Pro-FAQ
- Leveling Calibration Guide
- Unable to recognize USB
- PrusaSlicer Software Slicing Error
- Poor Print Quality
- Device Unable to Connect to the Network
¶ Device Abnormality Popup
- Nozzle NTC abnormal, please check it and wiring！
- Nozzle heating abnormally, please check it and wiring！
- Hotbed NTC abnormal, please check it and wiring!
- Hotbed heating abnormally, please check it and wiring
- The module is abnormal. Please calibrate the position of the nozzle and module
- Prompt “The vibration compensation process abnormal, Please check the X-axis Accelerometer gyroscope module and wiring”
- Prompt “The vibration compensation process abnormal, Please check the Y-axis Accelerometer gyroscope module and wiring”
¶ Maintenance
¶ Kobra 2 Pro
¶ Control Screen
¶ Limit Switch
¶ Motherboard
¶ Hotend
¶ Hot Bed
¶ Extruder
¶ Offset Measurement Switch
¶ X-Axis
- X-Axis Rails Replacement Guide
- X-Axis Belt Replacement Guide
- X-Axis Pulley Replacement Guide
- X-Axis Motor Replacement Guide
¶ Y-Axis
- Y-Axis Motor Replacement Guide
- Y-Axis Rail Replacement Guide
- Y-Axis Accelerometer Gyroscope Module Replacement Guide
- Y-Axis Belt Replacement Guide
- Y-Axis Pulley Replacement Guide
¶ Z-Axis
- Z-Axis Timing Belt Replacement Guide
- Z-Axis Lead Screw Replacement Guide
- Replacement Z-Axis Motor
- Replacement Z-axis Motor Bracket
¶ Proximity Switch
¶ Power Supply
¶ Print Head
- Print Head Teflon replacement Guide
- Print Head Adapter Board Replacement Guide
- Print Head Module Replacement
- Hot End Heating Rod
- Hot End Temperature Sensitive Wire
- Replacement Print Head Cooling Fan
- Replacement Model Cooling Fan
¶ WiFi Antenna
¶ Silicone Sock
¶ Filament Sensor
¶ Download Center
¶ Firmware
¶ Manual
- Kobra 2 Pro_User Manual_v1.2_EN
- Kobra 2 Pro_User Manual_Quick Start Guide_v1.0_EN
- PrusaSlicer Usage Instructions V1.1
- Cura Filaments Profiles
¶ Slicer Software
¶ Test Files
Please operate on the printer: "Print" ➡ "" Local "➡" Test Model ". And you could use the test model.