The Kobra 2 features a 5x faster printing speed, with a maximum print speed of 250mm/s. It has also been upgraded to the LeviQ 2.0 auto-leveling system, with smart z-axis offset， significantly improving your printing efficiency. Please refer to this module for the usage-related information of the Kobra 2 machine.
Official product page: Anycubic Kobra 2
¶ User Manuals
¶ Product Details
¶ Printer Manuals
- Assembly
- Manual
- Leveling Calibration Guide
- PrusaSlicer Usage Instructions V1.1
- Basic Slicing Software Operation Guide Video
- How To Change Filament During The Printing Process
¶ Setting up
- PrusaSlicer
- Please note：For the use of files, please refer to the document PrusaSlicer Installation And Parameter Import Guide V1.1
- Download：Filaments for PrusaSlicer Settings
- Ultimaker Cura
¶ Troubleshooting
- Kobra 2-FAQ
- FDM-Kobra 2 Series Print Head Blockage Troubleshooting Guide
- Leveling Calibration Guide
- Unable To Recognize TF card
- PrusaSlicer Software Slicing Error
- Device Unable to Connect to the Network
¶ Device Abnormality Popup
- Leveling is abnormal, please check whether the wiring of the calibration module or the X/Y coordinates are normal
- Hotend NTC abnormal, please check it and wiring！
- Hotend heater abnormal, please check it and wiring！
- Hotbed NTC abnormal, please check it and wiring!
¶ Maintenance
¶ Kobra 2
¶ Hotend
¶ Extruder
¶ Motherboard
¶ Heated Bed
¶ Power Supply
¶ X-Axis
¶ Y-Axis
- Y-Axis Belt Replacement Guide
- Y-Axis Rails Replacement Guide
- Y-Axis Bearing Pulley Replacement Guide
- Y-Axis Motor Replacement Gudie
¶ Offset Measurement Switch
¶ Proximity Switch
¶ Print Head
- Print Head Teflon replacement Guide
- Print Head Adapter Board Replacement Guide
- Print Head Module Replacement
- Hot End Heating Rod
- Hot End Temperature Sensitive Wire
- Replacement Print Head Cooling Fan
- Replacement Model Cooling Fan
¶ WiFi Antenna
¶ Silicone Sock
¶ Filament Sensor
¶ Download Center
¶ Firmware
¶ v3.0.6
Update log:
1.Fixing power-loss recovery issue.
Download：v3.0.6
¶ v2.9.3
Update log:
1.Enhanced Trigger Mechanism: During the initial phase of power resumption for the first layer, the trigger mechanism has been optimized not to engage.
2.Decreased Trigger Voltage for Power Resumption: The trigger voltage for continuing the print after a power interruption has been reduced from 21V to 18V.
3.Separate Heating for Print Head and Heated Bed: We have implemented separate heating controls for the print head and heated bed, allowing for better control and stability during printing.
4.Optimized handling of calibration module exceptions.
Improved speed mode adjustment method in the UI print settings page.
Download：v2.9.3
¶ Manual
- Kobra 2_User Manual_v1.4_EN
- Kobra 2_User Manual_v1.4_DE
Kobra 2_User Manual_v1.4_ES
Kobra 2_User Manual_v1.4_FR
Kobra 2_User Manual_v1.4_IT
Kobra 2_User Manual_v1.4_JP
Kobra 2_User Manual_v1.4_RU
Kobra 2_Quick Start Guide_v1.2_EN
Kobra 2_Quick Start Guide_v1.2_DE
Kobra 2_Quick Start Guide_v1.2_ES
Kobra 2_Quick Start Guide_v1.2_FR
Kobra 2_Quick Start Guide_v1.2_IT
Kobra 2_Quick Start Guide_v1.2_JP
Kobra 2_Quick Start Guide_v1.2_RU - PrusaSlicer Usage Instructions V1.1
¶ Slicer Software