Photon Mono M7 Pro inherits the core advantages of Anycubic's consumer-grade resin 3D printers. This product allows users to overcome resin type limitations, achieving high-speed printing of 130mm/h with standard resin. When using high-speed resin, the maximum speed can reach 170mm/h.
Additionally, this product features Anycubic's self-developed LighTurbo 3.0 optical system, equipped with a 14K high-definition screen, supporting printing with a minimum layer thickness of 10 microns, leading in printing precision.
To enhance ease of use and print success rates, the product supports automatic resin heating, maintaining the optimal printing temperature of 25°C for the resin.
Official product page:Anycubic Photon Mono M7 Pro
¶ User Manuals
¶ Product Details
¶ Printer Manual
¶ Setting up
In normal printing mode, it is recommended to set the layer height to 0.05mm, and the other settings are:
| Resin type Print parameter |
Basic Resin |
Plant-based Resin |
DLP Craftsman Resin |
UV Tough Resin |
Water-Wash Resin+ | ABS-Like Resin + | ABS-Like Resin Pro | High Clear Resin | ABS-Like Resin V2 | Standard Resin V2 | ABS-Like Resin Pro 2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Layers Thickness（mm） | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | / | / | 0.05 | 0.05 | |
| Normal Exposure Time（s) | 1.8 | 1.8 | 1.8 | 2.1 | 1.8 | 1.8 | 1.8 | / | / | 1.8 | 1.8 | |
| Off Time（s） | 0.5 | 0.5 | 0.5 | 1 | 0.5 | 0.5 | 0.5 | / | / | 0.5 | 0.5 | |
| Bottom Exposure Time（s） | 25 | 25 | 25 | 25 | 25 | 25 | 25 | / | / | 25 | 25 | |
| Bottom Layers（s） | 3 | 3 | 3 | 3 | 3 | 3 | 3 | / | / | 3 | 3 | |
| Z Lift Distance（mm） | 8 | 8 | 8 | 8 | 8 | 8 | 8 | / | / | 8 | 8 | |
| Z Lift Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | / | / | 6 | 6 | |
| Z Retract Speed（mm/s） | 6 | 6 | 6 | 6 | 6 | 6 | 6 | / | / | 6 | 6 | |
In fast printing mode, it is recommended to set the layer height to 0.1mm, and the other settings are:
| Resin type Print parameter |
Standard Resin | Standard Resin V2 | Plant-based Resin | Water Wash Resin | High Speed Resin | |
|---|---|---|---|---|---|---|
| Layers Thickness（mm） | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | |
| Normal Exposure Time（s) | 2.2 | 2.2 | 2.2 | 2.2 | 1.4 | |
| Off Time（s） | 0.5 | 0.5 | 0.5 | 2 | 0.5 | |
| Bottom Exposure Time（s） | 25 | 25 | 25 | 25 | 15 | |
| Bottom Layers（s） | 3 | 3 | 3 | 3 | 3 | |
| Z Lift Distance（mm） | 4 | 4 | 4 | 4 | 4 | |
| Z Lift Speed（mm/s） | 15 | 15 | 15 | 15 | 15 | |
| Z Retract Speed（mm/s） | 15 | 15 | 15 | 15 | 15 | |
¶ Troubleshooting
- M7 Pro FAQ
- Auto Feeding abnormal
- WIFI Connection Guide
- USB not recognized
- Poor print effect
- Model not stick printing platform
- How to deal with abnormal pop-up windows
- M7 Pro Print platform not installed detected troubleshooting
- M7 Pro Z-axis limit switch not working properly guide
- M7 Pro Firmware Update Guide
¶ Error Codes
- CODE: 300 Model slice file parsing exception
- CODE: 301 Model detachment detected
- CODE: 302 Model breakage detected
- CODE: 303 Levelling failed
- CODE: 305 Debris detected
- CODE: 307 Heating abnormalit
- CODE: 308 Detected abnormal automatic feeding module
- CODE: 313 Tension sensor abnormal
- CODE: 314 Wl Fl module abnormality detected
¶ Maintenance
- Maintenance recommendations
- M7 Pro-Material box cycle cleaning
- M7 Pro-Mechanical Calibration Guidelines
¶ Strain Gauge
¶ LCD screen
¶ Motherboard
¶ Motor
¶ Peristaltic pump tubing
¶ UV lamp module
¶ Control Screen
¶ Power supply
¶ Fresnel lens
¶ Z axis
¶ ACF Film
¶ Download Center
¶ Firmware
We recently upgraded the new RERF function, which is as follows:
1. Can customize the model calibration resin recent exposure time parameters for comparison verification;
2. Support 4/6/8 partition setting test mode, flexibly adjust the number of partitions according to the model size;
3. One-click automatic placement, free hands; (Update the latest slicing software simultaneously)
4. Automatic partition numbering, easier to identify the best exposure parameters than the previous function;
5. The device supports flexible adjustment of the exposure time of the partition, without repeated slicing;
If you want to experience this feature, you need to obtain it by upgrading the FPGA patch firmware locally.
Update method: Copy the following firmware file FPGA_1422_0045(0219).bin to a USB flash drive. After inserting the USB flash drive, start the printer, and click the Settings page - Versions - Local upgrade in the lower left corner to upgrade the FPGA patch firmware.
Tips: Format the USB flash drive and save the firmware file only on the USB flash drive to prevent other files from affecting the firmware upgrade.
¶ Manual
¶ Slicer Software
¶ User Manual
- Anycubic Phtonworkshop User_Manual_EN
- Anycubic Phtonworkshop User_Manual_DE
- Anycubic Phtonworkshop User_Manual_FR
- Anycubic Phtonworkshop User_Manual_ES
- Anycubic Phtonworkshop User_Manual_JP
- Anycubic Phtonworkshop User_Manual_IT
- Anycubic Phtonworkshop User_Manual_RU
- Anycubic Phtonworkshop User_Manual_ZH
- Auto-fill Unit User_Manual
- Resin Vat User_Manual